Solution Windows Vista

How to deactivate Data Execution Prevention error in Vista operating system?

Windows data execution prevention (DEP) is an important security attribute and part of several versions of Windows. The data execution prevention feature ensures that the application can’t be started from a region that has a non executable memory. Some times users get frustrated when they try to access the program which is using the feature of Data Execution Prevention. Users can easily disable the data prevention execution Vista. Here are the steps to do so.

You can follow these steps to disable Data Execution Prevention in Vista:

Step 1:Open the start menu and type CMD in search box.

Step 2:Click from the right section of the mouse on the CMD from the programs list.

Step 3: Choose the option for "Run as administrator".

You will see "User Account Control" window, click on continue.
Step 4: Command prompt will be opened. Type the following command and press enter key.

bcdedit.exe /set {current} nx AlwaysOff
Step 5: Then the message "The operation completed successfully" will appear on your screen.
Step 6: Type the "exit" and press enter to exit Command Prompt.
Step 7: Now restart your computer to make the changes effective.

Windows feature "data execution prevention" will be disabled by following the above steps.

How to enable the options "Page by E-Mail and Link by E-Mail" for a web page in Windows Vista?

Description: This problem occurs when your mail client is not set correctly. Users need to apply some settings to set the default mail application in Windows so that users can enable the options Page by E-Mail and Link by E-Mail.
Users can easily enable these options by following the steps provided below:

Here are the steps to be followed to access the Page by E-Mail and Link by E-Mail options:

Step 1: Click Start and then click on Default programs.
Step 2: Now click on "set program access and computer defaults"

You will see "User Account Control" page, click on Continue.
Step 3: Now select the radio button for Custom and then select radio button for your default mail application like Windows Mail.
Step 4: Now click Ok and close all opened windows.

Once you will follow the above steps, you will be able to use the Page by E-Mail and Link by E-Mail options for any web page.


How to fix error message "Failed error 8E5E03FA" that appears after installation of Windows Vista?

Description:When your Windows Vista can’t install updates for Windows, it will show the error message Failed error 8E5E03FA. This error describes that Windows update has failed. Users can remove Windows Vista error code by renaming a folder system32 list. This folder is responsible for installation of all updates in Windows Vista. If you don’t know how to fix error code 8E5E03FA, please follow the steps provided below:

Here are the steps to fix the window error code 8E5E03FA:

Step 1: Click on Start Menu then type CMD in search box.

Step 2: Right click on CMD and then select run as administrator.

You will see "User Account Control" window, press "Continue".
Step 3: From the available "Command Prompt" window you need to execute this command:

net stop cryptsvc
Step 4: Wait for a minute while the command gets executed and after then type the following command and press enter key.

ren catroot2 catroot3
Step 5: Type exit to close the command prompt.
Step 6: Restart your window to make the charges effective.

That’s all you need to do in order to fix error 8e5e03fa from your Windows Vista. Once you will follow the above steps, your Windows should install the updates without any other error.


Is your computer not working properly? Get the most optimum and free PC troubleshooting help

Computers since the past a few decades have become so lucrative for people to derive the most efficient output from their professional lives. Sometimes, these machines suffer from incurable errors which occur because the system encounters some problems. For a computer user, PC troubleshooting solutions are so crucial that he’s able to run his operations quite perfectly. Users can get simple solutions through a computer troubleshooting website to fix desktop problems. In fact, users can fix the problem themselves using the solutions from the computer troubleshooting websites. The computer not working situation arises when the PC does not have the right kind of power supply or it is attached by viruses. Even the blue screen of death can cause such computer not working scenario. So, the user should know what to do in such computer not working situations.

We offer the most lucid and inclusive information on computer problems and solutions. Since the users know how to combat computer troubleshooting with our solutions to fix computer crash problems, they face no loss from an error involving computer not working situations. Such information on Computer problems and solutions is pretty useful for users because sometimes they need instant help for PC troubleshooting. These PC troubleshooting solutions have been explained by us with perfect screenshots, which aid users on how to fix computer crash problems. On top of it, we also provide PC troubleshooting email help if the solution is not provided on our computer troubleshooting website. The users can however get complete aid from our website, which list solutions to fix computer freezes problems in complete detail with clear steps.

How to solve unexpected computer freezes problems with right solution?
We make sure that the users are able to solve all their computer related problems using our simple to follow solutions. So, any user does not need to call a computer professional at home to fix a computer not working problem. Often taking aid from a computer expert involves enormous expenses to fix computer problems.

Benefits of getting solutions from  computer-solutionsbd
  • computer-solutionsbd contains complete set of computer problems and solutions to provide you perfect source for free computer solutions for any kind of computer problem that a user can ever encounter.
  • We don’t charge anything for these highly beneficial computer solutions which are up-to-the-mark and totally attuned for resolving computer issues.
  • Our computer solutions aid to restore computer urgently despite of the severity of the problem.
  • Our solutions are sufficient to restore computer after computer freezes problem, due to issues like Trojan Virus. There is no need to get in touch with any PC restore professional for computer repair.
  • So, restore computer through our effectual solutions for errors like hal.dll file missing or schvost error.
  • We try hard to provide up-to-date and fast computer solutions at no cost to help you restore PC. 


How to fix windows error message "The publisher could not be verified"?

Windows verifies all the software before it allows users to install any one of them in Windows. A digital certificate is used by the operating system to recognize the publisher program. All software, need a certificate before installation, without which Windows shows the error that “the publisher could not be verified”. Users can fix this error message by following some simple steps.

Here are the steps to fix "The publisher could not be verified" error message.

Step 1: First of all you need to open IE from and start menu.
Step 2: Now click on the tools menu and then click on internet options.
Step 3: Internet Options dialog box will be opened. Select the security tab.

Step 4: Now click on Local Intranet icon and then click on Sites.
Step 5: Then strike the "Advanced" button and then remove tick mark from the check box of "Require Server Verification option".

Step 6: Now you need to insert the server name or the name of application domain you are referring to, for that and click on "Add" button.
Step 7: You also need to verify that you add the symbol "//" too. After performing this action you will see the file or the server name will appear under the websites option of the local intranet dialog box. Click Close.
Step 8: Restart Your PC to make these changes effective.

Now if you like to disable the security dialog box of .exe files, you need to follow these steps.

Step 1: Go to Start and type RegEdit in Search box and press enter.
Step 2: Go to Start and type RegEdit in Search box and press enter.

[HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Policies\Associations]
"LowRiskFileTypes"=".exe
Step 3: Right click on policies. Select new and then select key. Type the name Associations in the new key instead of new key#1.
Step 4: In the right side pane, double click on the default key and type ("LowRiskFileTypes"=".exe ) in the value data box. Click ok.



Close the registry editor and restart your PC.

So these are the simple steps. After using them you can run any new software without getting the error message "the publisher could not be verified".




How to repair an error "Internet Explorer was not able to open this Internet site" that appears when using Windows Vista?

This "internet explorer was not able to open this internet site" error generally happens because the content type registry tweaking for any kind of .xml file is not right. If internet explorer cannot open the internet site, registry settings have to be rearranged for opening them up without any problem.

Here are the steps to be followed to fix the error "Internet Explorer cannot open the internet site".

Step 1: Click on Start then type CMD in search box. Right click on CMD and select run as administrator.


You will see "User Account Control", click on "Continue".
Step 2: From the Command Prompt window you need to execute this command:

regsvr32 msxml3.dll


You will receive a windows that dll register successfully.

Step 3: Click on Ok button and restart your computer to make the changes effective.

That’s all you need to do in order to fix the error message "Internet Explorer was not able to open this Internet site".



How to share Windows Vista broadband internet connection with Windows XP based computer system?

Sharing an internet connection describes the method to share the same Internet Connection between two or more computers. Windows internet connection sharing enables the users to share the resources and data more frequently. Sharing Internet connection between different Windows is also possible. If you are using Windows Vista and you need to share your computer internet connection with a Windows XP based computer system, please follow these steps to accomplish that.

Here are the steps to establish a Windows sharing internet connection.

Step 1: Click on Control Panel from Start Menu.
Step 2: Now click on "Network and Internet".
Step 3: Click on Ok button and restart your computer to make the changes effective.
Step 4: Now from left pane, click on "Manage Network Connections".
Step 5: Right click on the network you want to share and select properties from the shortcut menu.
Step 6: Right click on the network you want to share and select properties from the shortcut menu.

Step 7: Place the Check Mark for Allow Other Network Users to Connect through This Computer’s Internet Connection and Click OK button.


Now the other LAN card automatically gets an IP address. You can see this address via clicking on its Properties.
Step 8: Click on Local Area Connection icon from right side of your mouse and select properties.
Step 9: Select Internet protocol version 4(TCP/IPv4). Then select properties.


Step 10: Now go to the other XP computer connected on the same network. You can use this computer to obtain an Internet connection.

Step 11: For doing that, go to start and right click on "My network places".
Step 12: Now, click on Local area connection from right part of your mouse and select properties.
Step 13: Make sure General tab is selected. Select the option Internet Protocol and click on properties.
Step 14: Type the following Details in your Internet protocol Properties just as they are in the following screenshot.
Step 15: Click on Ok button and close all opened windows.

That’s all you need to do in order to share internet connection between two or more computers.


Why the files earlier deleted, show up in the Windows Vista search?

When search is conducted in Vista, some deleted files show again in search queries. Such wrong results occur because sometimes, Windows OS requires some time before its results are changed and the deleted files are included. But, if the search index continues to show deleted files, even after a lot of time since such files have been deleted, then the indexing service is obsolete and needs to be rebuilt.
To resolve this issue one has to reconstruct the entire Search Index again. Rebuilding the Search Index can be a tedious task depending upon the number of files and your system capability.

To make a new search index in this operating system, follow the given steps:

Step 1: Click on "Start" button, type the words Indexing Options in the search box and press Enter.
Step 2: Click the option Advanced, under the various choices listed under indexing options.
Step 3: Press the option of "Continue", as soon as the option of user account control panel emerges up on the screen.

Step 4: Advanced options dialog box will appear. Click on the "Rebuild" option to build Search Index again.
Step 5: Press OK when you see the given below window.
Step 6: When you see Indexing Complete, press on Close Button to exit.



That’s all you need to do in order to rebuild the indexing option in your Windows Vista.




How to fix the error message that "Your user profile was not loaded correctly! You have been logged on with a temporary profile" in Windows Vista?

This error message that "your user profile was not loaded correctly" appears when the profile gets deleted mistakenly from the computer. The user gets this error because after he deletes his profile, Windows is not able to recognize it due to the availability of the security identifier attribute.   Windows tries to make the user access the PC through a profileimagepath route but without his user profile, he is shown a non valid path. If your user account does not load correctly, you can fix this problem by deleting your SID (Security Identifier Attribute) from the registry.

Hence, you can fix the error message "profile was not loaded correctly" with these steps:

Step 1: Restart your computer and login as an administrator in your Windows Vista.

Step 2: Type "Windows Explorer" in Start Search box and click on the Windows Explorer from top of the Program list.
Step 3: Open the folder C:\User and Delete these directories of both "Temp" directory and "problematic" user profile.

Step 4: Click on start and type "RegEdit" in start search box. Press enter key to open registry Editor. You will see "User Account Control" window, click on "Continue".

Step 5: Find for the registry subkey given below and expand it.

HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Windows NT\CurrentVersion\ProfileList

Step 6: Double click on "HKEY_LOCAL_MACHINE" and then double click on "SOFTWARE" to expand.
Step 7: Now double click on "Microsoft" under "SOFTWARE".
Step 8: Now double click on "Windows NT" and then double click on "CurrentVersion"
Step 9: Double click on "ProfileList" under "CurrentVersion".The profile list will include some series of SID attributes used by Windows Vista.

Step 10: Locate the problematic SID and delete that by right click on that.
Step 11: Windows will show the warning message as follows; click on Yes to confirm the deletion.
Step 12: Close registry editor and reboot your computer.

After doing all these steps, when you will log on to the system, you will see that your profile has been created and you can easily log in. Thus, if are getting this error that vista profile not loaded correctly during booting, you can easily follow the steps mentioned above and resolve it.



How to repair the error that Window Vista takes much time to shut down?

Some times Windows shut down problems can arise with Windows Vista. Slow shut down may happen when Windows takes much time to end the Windows programs which run in the background. The Vista slow shutdown problem can be resolved by changing the corresponding registry. Once the registry is modified, such delayed shutdown will be cured. Sometimes along with shutdown, registry damage also slows down the start up of the PC.

These steps help in the introduction of important registry modifications to cure this error.

Step 1: Click on start menu. In the search box, type "regedit.exe" and press enter key from your keyboard.


A warning message will appear, click on continue button.
Step 2: Registry Editor Dialog box will be opened. Navigate the following registry key:

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control
Step 3: Double click on "HKEY_LOCAL_MACHINE"

Step 4: Locate and double click on "SYSTEM" under "HKEY_LOCAL_MACHINE"

Step 5: Locate and double click on "CurrentControlSet" under "SYSTEM"

Step 6: Select "Control" under "CurrentControlSet"

Step 7: You will see a registry key named WaitToKillAppTimeout in the right pane. Double click on it.

Step 8: Edit string window will be opened. In the Value Data: give a new value "1000" and press OK.
Step 9: Close the registry window.

That’s all you need to do in order to fix the Vista shut down problem.



How to resolve the issue of Games explorer, which does not open even after clicking on its icon in the Windows Start Menu?

In the Windows Vista operating system, games have been given preference just like any other essential application. A separate "games explorer" icon has been provided in the start menu which launches the games menu.

To resolve the games explorer issue in Windows Vista, follow the given steps:

Step 1: Click on start button then type cmd in the search box.

Step 2: Right click on cmd and select "Run as administrator".


A warning window appears on screen, click continue.
Step 3: In the Command Prompt window type in this command:
"regsvr32.exe gameux.dll" and the click "Enter".



After you type in the command mentioned previously, a message will emerge:

DllRegisterServer in gameux.dll succeeded.




That’s all you need to do in order to fix the error when the games don’t launch from the games icon present in the Start Menu. 


How to turn off driver signing feature in Windows vista 64 Bit to install new driver?

When any one adds a new hardware under Window Vista he/she needs to disable driver signature enforcement to not get the error unable to install the software. Once you will disable the security feature of driver signing Vista, you will be able to add the new hardware easily.  Users can disable digital driver signing just by following some simple steps. But you must enable this driver signing security feature after disabling it as digital driver signatures are a division of the security measures of the Vista Operating System.

Please use these steps to turn off driver signing.

Step 1: Click on start button and then type cmd in the start search box

Step 2: Right click on cmd and select "Run as administrator".


You will see "User Account Control", click on "Continue".
Step 3: Command prompt window will be opened. Type the following command in command prompt and press enter key to execute.

Bcdedit.exe /set nointegritychecks ON
Step 4: Without any delay, restart your driver which you were trying to install previously.  Since the disable digital driver security feature is turned off, it will be easily installed.

Step 5: After installing the driver, you need to turn on automatic driver signing check. Type the following command and press enter key to do that.

Bcdedit.exe /set nointegritychecks Off
Step 6: Restart your system after pressing enter to complete the process of enable driver signing effectively.


How to correct the problem of calendar gadget, which when added to the Windows Sidebar shows a plain orange background with no date?

New Windows Vista comes bundled with a variety of gadgets which include calendar gadget and appointment gadget. If your calendar gadget is not working properly, you need to re-register vbscript.dll file. From the command prompt, register the file vbscript.dll again to fix this problem.

Here are the steps to fix "calendar gadget" problem in your Windows Vista:

Step 1: Click on "Start" and type "CMD" in start search box.
Step 2:: Right click on CMD from the programs list and select "Run as administrator".
Step 3: User account Control message will appear. Click on continue button to proceed further.

Step 4: Type in the following command "regsvr32.exe vbscript.dll" and press enter key to execute.
Step 5: The message "DllRegisterServer in vbscript.dll succeeded" will appear after executing the command. Click OK button.
Step 6: Type "exit" in command prompt.
Step 7: Restart your computer to make the changes effective. The calendar option of Vista’s operating system will be showing itself correctly now.


How to disable the magnifier which automatically opens up after the voice recognition software is activated?

This problem is likely to occur if the “turn on magnifier” option has been enabled on your computer. Users can disable the “turn on magnifier” option to get rid of magnifier problem.

To fix the magnifier error, follow the given steps:

Step 1: Click Start, then go to "All Programs".
Step 2: Go to Accessories and then click on Ease of Access, and after wards Ease of Access Center .
Step 3: Select the option of "Make the computer easier to see".

Step 4: Deselect the choice Turn on Magnifier and then Click Apply and Save button.
That’s all you need to do in order to turn off the magnifier option in Windows Vista.



How to disable the parental control activity report popup notification which appears at the time of startup?

Parental control is applied to the internet system to restrict the viewing of certain websites on the Internet. You can mark the websites which you want your kids to visit or not. Daily activity report shows the sites visited daily on your system. Users can easily disable “Parental control notification” from their Windows Vista operating system by following some simple steps.

You can change the parental notification settings by following the steps given below:

Step 1: Click on Start and go to Control Panel.
Step 2:Now click on User Accounts and family safety.
Step 3:  Click on the Set up parental controls for any user.

Step 4: A warning windows will Appear, click continue button.

STEP 5: Select the Family Safety Options from the left hand side of the control panel window.
STEP 6: Select the radio button for "Never" to log off the settings for Parental Controls notification and click OK.

Also, you can select the weekly option so that you know about the browsing activities of your children with a weekly report.

That’s all you need to do in order to turn off the appearance of the Parental control Activity report.



How to empty the recycle bin completely in the Windows Vista based PC?

Recycle Bin is container or holder of deleted files. When user deletes any file or data from Windows, that file gets stored in Recycle Bin and if later user needs that file, it can be restored from the recycle bin. Since Recycle bin has a limited memory space, so user needs to empty it from time to time. The content once deleted from the recycle bin can not be recovered further.

Follow the given steps to completely delete all the contents of the "Recycle Bin" folder. After following the given procedure, no one would be able to recover the deleted data.

 
Step 1: Click on "Start" and type "CMD" in start search box.
Step 2:Right click on CMD from the programs list and select "Run as administrator".
STEP 4: User Account Control warning message will appear. Click on continue button to proceed further.

STEP 3: Command prompt will be opened. Type the following command and press enter key.

rd /s /q C:\$Recycle.bin

STEP 4:Once you will press the enter key, all the content of C: drive in recycle bin will be deleted permanently. Follow the above command for all drives in your computer.


STEP 5: After that type the following command to exit the command prompt Window.

C:\WIndows\system32>exit
That’s all you need to do in order to empty recycle bin permanently.



How to enable the "Create" button in System Protection tab under "System Properties" and remove the error “Restore Point creation disabled by group policy"?

User will get the error message like “Restore Point creation disabled by group policy” when system administrator has enabled the “turn off configuration” policy in Windows Vista. Users will not be able to create a restore point until turn off configuration policy is not disabled. Please follow the steps provided below to turn on the configuration policies attribute:

Step 1: Go to "Start" option, type gpedit.msc in start search box and push the ENTER button
A "User Account Control" window will appear, click on "continue"

STEP 2: Group Policy Editor Dialog box will be opened. Navigate the following path.

Computer Configuration >> Administrative Templates >> System >> System Restore.
STEP 3: Locate the "System Restore" under "System" and select it.

STEP 4: From the right pane, double click on the "Turn off Configuration" option

STEP 5: Turn off Configuration properties dialog box will be opened. Select the radio button for "Not Configured".

STEP 6: Click and Apply and then OK button.

STEP 7: Close the "Local Group Policy Editor" box and reboot your desktop computer to see that changes actually happen.

That’s all you need to do in order to activate the create restore point utility.



How to remove all the task scheduler history in windows Vista?

Task scheduler is the feature in Windows which lets the users to schedule their tasks according to date and time. Once users will schedule the task, system will remind the user about the scheduled task. But the task once scheduled can not be deleted itself. Users need to delete the expired task manually. We are providing you step wise step instructions to remove the scheduled task in Windows Vista.

Following are steps that can be used to clear the events history for all tasks:

Step 1: Click on start menu and type "Eventvwr.msc" in start search box.
STEP 2: User Account Control warning dialog box will appear. Click on "Continue" button to open the Event Viewer dialog box.

STEP 3: Now, you need to navigate this branch in the event viewer box:

Event Viewer (Local) / Applications and Services Logs / Microsoft / Windows / TaskScheduler / Operational


STEP 4: Now right click on the "operational" and select "Clear log" to delete all the log entries.

STEP 5: Following message will appear. Click on "clear" button.

STEP 6: Close the Event Viewer dialog box.

That’s all you need to do in order to delete scheduled tasks in your Windows Vista.


How to remove the error "The system cannot find the path specified when a user has to access a network from the elevated command prompt window rather than "My Computer"? But the drive letter for which this error appears is listed under the "My Computer" options.

Network drive is different from a local drive. While the latter resides on your own system or PC workstation, the network could be a disk or tape drive on a local server which can be accessed by everyone in the network if it is not restricted by system administrator. However, when restricted access for the drive is set by the network administrator, the users get the error message that”the system cannot find the path specified”. So, they need to edit some registry files to get rid of this error message.

Please follow the steps provided below to fix “The system cannot find the path specified” error message.

Step 1: Click on start menu and type "Regedit" in start search box.
You will see "User Account control" window, click on “Continue”

STEP 2:Press enter key to open Registry Editor.

STEP 3: Now navigate the following path.

HKEY_LOCAL_MACHINE \ SOFTWARE \ Microsoft \ Windows \ CurrentVersion \ Policies \ System

STEP 4: Double click on "HKEY_LOCAL_MACHINE" and then locate "SOFTWARE" key from the list.
STEP 5: Double click on "SOFTWARE" and then locate "Microsoft" key from the list.

STEP 6: Now look for "Windows" and then locate "CurrentVersion".

STEP 7: Under "CurrentVersion" locate the "Policies" and then "System".
STEP 8: Right Click on the empty space of right side pane and select New and choose "DWORD(32-bit) Value".
STEP 9:Give a name as "EnableLinkedConnections" to the new "DWORD(32-bit) Value"..
STEP 10:Double Click on "EnableLinkedConnections" in the right side pane and type 1 in the value data box instead of 0. Click Ok
STEP 11:Close the registry Editor and click on restart the PC.

So, users can then access the network drives from the "My Computer" options. 



How should one install Windows Vista after XP?

Many computer users want to use Windows Vista even though they have Windows XP installed on their hard drive. They want both Windows XP and Windows Vista operating systems. Now, such dual booting is quite possible. Installing Windows Vista over XP has an advantage that the users can benefit from both the operating systems. Such installation is quite possible because both these operating systems have autonomous boot managers due to which they can’t affect each other’s installation. But users must install both Windows OS on different drives. Users need to follow some simple steps to install Windows Vista on Windows XP.

STEP 1:Ensure that you have second partition in your hard drive. The most important requirement for this procedure is that it should have a second partition on the hard drive so that installing a second operating system is easy.

STEP 2: Insert the Windows Vista installation disk into the DVD-Drive and restart your PC.

STEP 3: You will see the Windows Vista setup prompt while the system boots from the DVD.
STEP 4: First of all, you need to choose your language, time and currency format and click on next button.
STEP 5: Now go ahead and click on "Install Now".

STEP 6:Now you will be asked to enter the product key, submit the key for your operating system and click on Next button.

STEP 7: Now Windows installation setup will ask you to choose your version of Windows Vista. Select the appropriate version and click on "next". After selection of the right Vista OS version, please place a check mark next to "I have selected the edition of windows that I purchased"
STEP 8: Now you will see the Microsoft software license terms, just sift through them and select "I accept the license" terms and click on next. .
STEP 9:Now in the next step, click on custom (advanced).
STEP 10: Select the hard drive partition in which you want to install your Windows Vista and click on "next".
STEP 11:Once you have successfully installed your Windows Vista, then your system will automatically reboot. After Booting, you will see a screen which will show both Windows XP and Windows Vista. Go ahead and choose the operating system in which you want to work.
These are some simple steps that you have to follow to install Windows Vista in a Windows XP based operating system.



How to get rid of the error "cannot find MSzVBVM60.DLL"?

The error "cannot find MSVBVM60.DLL" occurs because your Vista operating system can’t run with outdated versions of this file. Hence the user can remove his error by downloading the newer versions of this file from the Microsoft website.  To repair the error "msvbvm60 dll was not found", you need to get the Visual Basic 6.0 SP5: Run-Time Redistribution Pack, which downloads the MSVBVM60.DLL file from this link.  Please follow the steps provided below to restore DLL files.

Here are the steps to fix “missing dll” files in your Windows Vista:-

STEP 1:Visit the link provided below:

http://download.microsoft.com/download/vb60pro/Redist/sp5/WIN98Me/EN-US/vbrun60sp5.exe

STEP 2:The following prompt will appear. Click on “Save File” button.
STEP 3:Save the file on your desktop. Now "double-click" on the file you have saved.

STEP 4: The following message prompt will appear. Click on "yes" button.
STEP 5: As soon as you will click on "Yes" button, "Visual Basic 6.0 SP5" program will be installed in your computer.

STEP 6:Now reboot your computer to make the changes effective and fix the error "msvbvm60 dll not found".

That’s all you need to do in order to fix "msvbvm60 dll not found" error message.



How to choose a picture as the thumbnails view of a folder in Windows Vista?

Thumbnails View is the feature in Windows which lets the users to preview a folder in terms of data contained in it, as a picture. Users can select the mode in which they want to preview the data contained in the folder and even arrange them in the form of a list, icons or as a "view them along with their information".

To begin with, first change the view settings in the Computer folder

STEP 1:Go to Computer by clicking on the Start option at the bottom left of your screen
STEP 2:When the Computer folder opens, then click on the organize tab on the top. From the drop-down list, select the option Folder and Search Options.
STEP 3: Now the Folder Options window appears in front of you from where you should select the View tab. Find the option Always show icons, never Thumbnails and uncheck the box against it.  After that click Apply and Ok to exit the dialog box.
Now follow the given steps to view the thumbnail preview of the data in a folder:

STEP 1: Right-click on the folder for which you want to set Thumbnail Preview and select Properties from the shortcut menu.
STEP 2: Folder Properties dialog box will be opened. Select the Customize tab

STEP 3: Under folder pictures, click on Choose File button.
STEP 3: Browse and select the image you want to apply to your folder as a Thumbnails View.

STEP 4:Click on "Open" button.
STEP 5: Close the Folder Properties dialog box and check the folder on which you have applied Thumbnail settings. You folder looks like as shown in screenshot below:
That’s all you need to do in order to set the thumbnail view on any folder.



How to change the name of the user account in Windows Vista?

Windows offers the feature to create more than one user accounts. Those user accounts are identified by name given to them. All the user accounts can have administrator privileges so that any one can make the changes later. If you want to change the name of the user account name, you must have to be login as an admin. Here are the steps to make the changes in your user account in Windows Vista.

STEP 1:Login as an administrator in Windows Vista.

STEP2: Go to start and then click the thumbnail picture assigned to the user name.
STEP 3: User Account dialog box will be appeared. Click on "Change your Account Name".
STEP 4: You receive a notification "Windows needs your permission to continue". Click on the continue button. 
STEP 5: Type in the New Account name text box. (as shown below)
STEP 6: After typing the name, click on "Change name" button.

STEP 7:Now restart your computer to make the changes effective.

Alternate Solution

The other alternative is that you can altogether create the new user name. Please try the following steps to do so. 

STEP 1: Go to Start and then type "User Account" in start Search box.

STEP 2: Choose the option of User Accounts from the programs list.
STEP 3: A window by the name of "Control Panel > User Accounts" will be opened. Here select the option "Manage another account"
STEP 4: Now, from the bottom of the new opened window, click on  "Create a New Account".
STEP 5: Give a name to new user account and select the radio button of Account type.

STEP 6: After finishing with everything, press "Create Account" button.
Now that you have created a new account you can copy the user settings from the previous accounts. For that, please follow the steps provided below:

STEP 1: Click the Start menu, right click on the Computer and from the fly-out list select the "Properties".
STEP 2: In the System Properties Window, click on the advanced tab and click on Settings button.
STEP 3: In the new box which appears called "User Profiles", select the profile from which you want to import the data into the new profile/account and then click "Copy To" option.
STEP 4: Now browse and select the destination new user’s profile folder, where you want to import the data of the previous profile. When you complete the process copy confirmation dialog box appears, click Yes on that.    
STEP 5: Now click on ‘Yes’ to continue.
STEP 6: Now exit all the windows.

That’s all you need to do in order to rename a user account name or create a new user account which has the same settings as the previous one.




How to disable "Windows error reporting center" in Windows Vista?

To get rid of this Windows error reporting problem, follow the given steps: 

Windows error reporting center in Vista allows users to get solutions for problems pertaining to operating system. The instructions included in a specific solution allow users to employ them to solve the issue on their own or where to download an update from the Windows. But the users can remove the appearance of such error messages which instruct them to use the Windows error reporting all the time when there is a problem.

STEP 1:Select "Start" from the bottom left of your screen, and then click control panel
STEP 2: Click the System and Maintenance Option. After that click "Problem reports and Solutions"


STEP 3:Now click on "Change Settings" from left pane.   
STEP 4: After clicking on the above option, select the radio button for "ask me to check if a problem occurs" option.  Then Click on Advanced Settings.
STEP 5: After clicking on Advanced settings, a new window will appear, select the OFF radio button over there and press OK.
STEP 6:  Now again click on OK button on the window which appears in front of you.
STEP 7: You will now see Windows problem reporting is turned off message on your screen, choose close option there.
After you have performed the changes as mentioned above, you will not be automatically directed to Windows windows  error reporting center all the time when there is a certain error in your PC.


How to disable the Windows vista constant reminder, which informs at the time of startup that some programs are turned off?

Constant Reminder in Windows Vista informs the user about those programs which have been turned off by the user or by system. Windows startup programs also include security programs and if they will be turned off, vista turn off notifications will appear. Windows keeps  popping up notifications until user does not click on them.

The reminders, which popup at the time of the startup generally appear in the form of balloons at the bottom right of the screen. If you don’t want to get the notification about turning off startup programs, please follow the steps provided below to disable Windows Vista constant remainder.

STEP 1:Type "regedit" in start search box from the start menu and press Enter.
STEP 2: a Registry Editor window will appear then navigate the following path in Registry.

HKEY_CURRENT_USER\Software\Microsoft\Windows\CurrentVersion\Explorer\Advanced


STEP 3:As you click on the "Advanced" option, its contents are displayed on the right side of the screen.

STEP 4: Move your mouse pointer, to the empty area of the right side of the Windows, and right click. Select “NEW” then select "DWORD (32-bit) Value"“from the cascading menu. 
STEP 4: Rename its value to "EnableBalloonTips"
A new entry is created of the Type, REG_DWORD

STEP 6: Double click on this and type the Value Data to 0 (Zero).
STEP 7: Strike ok and close the Registry Editor Windows.

STEP 8: Reboot your system to make the changes effective.

That’s all you need to do in order to disable Windows Vista constant reminder.



How to enable the System Configuration - Restore Restart Prompt option which was disabled accidentally in Windows Vista?

Option to "Restart the System" appears when one modifies the settings of computer using System configuration utility (msconfig.exe). This option implies that a user can revert back to his older settings even though he has made some system registry changes.  If a person accidentally disables this option, this message doesn’t appear even when one modifies some system settings. To restore this option, the concerned registry key must be deleted. To do so follow the steps given below:

STEP 1: First of all, go to Start option, then write regedit in the search box and push "ENTER" key.
STEP 2: Registry Editor Dialog box will be opened. Then navigate the following registry key:

HKEY_CURRENT_USER\Software\Microsoft\Shared Tools\MsConfig


In right side of Registry Editor, you will see “NoRebootUI”, please select and delete it
STEP 3: A confirmation message appears please select "Yes".
STEP 4:Restart your PC to make the changes effective.

That’s all you need to do in order to in order to enable the Restart option in Windows Vista.



How to get rid of error message "An Application Registration change was made for a known application file: C:\Progarm Files\Windows Defender\MpCmdRun.exe." in Windows Vista?

Windows defender is an important program in windows because it helps users in safeguarding themselves against the reduced performance of the PC. It can be caused due to spyware and undesirable software which has been installed on the computer. So, when defender finds the spyware on the computer, it reduces the disruptions caused by it. In this way, in spite of spy ware, the computer users don’t face any slowness in their work.

This notification appears due to the Windows defender tool which comes bundled with Windows Vista software packet. To get rid of this notification, follow the given process.   

STEP 1: Click on Start menu and type “Windows Defender” in start search box and press Enter key to open it.
STEP 2: Windows Defender dialog box will be opened.

STEP 3: From its menu bar select the option "Tools" menu.

STEP4:  Click on “Options” from Tools and Settings.
STEP 5: Navigate through the page and in the "Real time protection options" sections, uncheck the "Changes made to your computer by software that is permitted to run" under "Choose if Window Defender should notify you about"
STEP 6: Click on Save button to apply the settings.

You will see "User Account Control" window, click on "Continue".

That’s all you need to do in order to get rid of error message "An Application Registration change was made for a known application file: C:\Progarm Files\Windows Defender\MpCmdRun.exe."




How to get rid of the issue that Vista can’t read DVD drive?

When Vista can’t read the DVD drive, this may happened if drive gets corrupted. So, the users feel irritated because they are not able to run a DVD in this operating system. This error is shown when the contents of an inserted DVD don’t get show on the monitor. Even the computer hangs up for some time due to this read inability.  If you are facing the error DVD not working in Vista, then you can get over this issue by following some simple troubleshooting steps. However, to keep your DVD/CD- drive up to date, make sure that you clean the CD lens regularly with a clean and dry cloth.  

To get rid of DVD problems and heal the drive which is corrupt, follow the steps given below:  

STEP 1: First step to repair DVD drive in Windows Vista is go to Start and type the command "regedit", in Start Search at the bottom left of your screen box
STEP 2: Press enter key to open the registry Editor. Now Navigate the following branch.

HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Control\Class\{4D36E965-E325-11CE-BFC1-08002BE10318}


When you look for the mentioned registry key then make sure you are using the correct sub-key. You can verify it by checking the default data which must be DVD/CD-ROM and the CD-ROM is the class data value.

STEP 3: In the right side of the window, find UpperFilters and LowerFilters, right-click on these. Then use Deletefor registry entry.
STEP 4: When the confirmation dialog box appears then click Yes.
STEP 4: After that click the registry editor and then reboot computer.

That’s all you need to do in order to fix DVD reading problem in Windows Vista.




How to stop Windows Vista operating system from automatically carrying out the process of de-fragmentation ?

Disk defragmenter is an application included in windows operating systems. The main purpose of defragmenting your computer is that the users should experience a faster access of the files stored on the machine. So, the files are stored in such a way that they take up closest storage positions. In Vista, this application is scheduled to run automatically by employing the task scheduler utility which causes problems. The user can however disable auto defrag using these simple instructions.

Follow the steps given below to resolve the problem:

STEP 1: Click on Start at the bottom left of your screen.

STEP 2: Go to Control Panel and then select System and Maintenance.


STEP 3: Under System and Maintenance, select Performance Information and Tools
STEP 4: After that select the "Advanced Tools" option in the left side of the window.
STEP 5: Click on the "open disk defragmenter" option which appears on the screen.
STEP 6: A button named "Run a Schedule" which is highlighted, should be unchecked.

STEP 7: After that click OK. 

That’s all you need to do in order to disable Windows Disk defragmenter auto run. After disabling Disk defragmenter scheduling, user need to perform Disk Defragmentation manually time to time. This utility stores the files sequentially on Random Access memory and frees up the disk space.



How to see Hidden files and folders in Windows Vista?

Some of the files are hidden on Windows so that the unknown users can’t delete them. Some of the files can however also be stored in the hidden files and folders option by viruses so the users find it hard to delete them.
But now with the following steps, the users can unhide hidden folders and files so that they can be checked.

If you are unable to view hidden files, adhere to the steps provided below:

STEP 2:Click on computer from Start menu.
STEP 2: Choose the Tools box and select Folder Options from drop down menu.
STEP 3:Folder Options dialog box will appear, choose View tab.

STEP 4: Under hidden files and folders, choose radio button for "show hidden files and folders".
STEP 5: Click on Apply and Ok button.

That’s all you need to do in order to display all hidden files and folders in your Windows Vista.



How to update Anti-virus or firewall status on Windows Management Instrumentation in Windows Vista?

For obtaining status of Windows Firewall and other Anti virus firewall protections along with their present condition, Windows Security Center has installed an application know as “WMI” which stands for Windows Management Instrumentation.  Windows Management Instrumentation shows the updated or latest conditions of Windows security Applications installed in Vista.  

But, sometimes misleading or outdated information about such protections is also shown by this Security Center, which is present because of trouble in WMI data storage.

Bellow mentioned steps will assist you to resolve the issue of WMI depository in Vista:

STEP 2:Go to "Start" and type "CMD" in the Search box.
STEP 2: Right-click "CMD" from the programs list and choose "Run as administrator" from the resulting menu.
STEP 3:Now, type the following commands and strike "Enter" to execute it.

winmgmt /verifyrepository
STEP 4: You will receive the note "WMI repository is consistent" in command prompt. So, enter this command:

winmgmt /salvagerepository
STEP 5: You will receive the note "WMI repository is consistent" in command prompt. Close the command prompt window.
STEP 6: Restart your computer to make the changes effective.

The above steps will allow users to store the latest Anti-virus or firewall status on Windows Management Instrumentation.



How to disable Microsoft vista Narrator from running automatically in Windows Vista, at the time of start-up?

Microsoft narrator is an application which ensures that the users can hear the text on the screen in the voice of a narrator, generally Anna. The text on the PCs screen consists of vista menus and other applications. But, sometimes, users find hearing such a voice an irritation and hence prefer to stop narrator. Since the narrator is initiated as a start up program, to turn off narrator vista, one needs to stop programs from running at startup.

Find the solution below, to disable narrator: 

STEP 1:Click on "Start" and access the Control Panel.
STEP 2: Locate and click two times on "Ease of Access Center". 
STEP 3: Now click on "Use the computer without a display".
STEP 4: Now, remove the check mark for "Turn on Narrator" and click on Save button.
STEP 5: Now again follow the "Step 1" and "Step 2".

STEP 6: In the next window click on "Change administrative settings" which appears in the left side of the window.

STEP 7: User Account Control message prompt will appear. Click on Continue button to proceed further.
STEP 8:Then uncheck the option "Apply all settings to the logon desktop" which stops programs from running at the startup including narrator. And then click on Save button.  
After carrying out the remedial actions, restart your PC to check if the narrator opens up automatically. Your problem should have been solved by now.



How to rectify the problem “VBScripts required for this application” while trying to install iTunes?

ITunes is an application which is used for playing audio and video files. To install the iTunes, VBS (Visual Basic Scripting) scripts are required in Windows. All the computers have Windows scripting host installed these days which require VBS. This scripting host is used by many windows operating systems and internet explorer. Disabled VBS scripts are one of the most commonly encountered iTunes Vista installation problems.

To install and use the iTunes properly, follow the steps provided below:

STEP 1: Type CMD in start search box from start menu.
STEP 2:Right click on “CMD” from the list of programs and choose “Run As Administrator”
STEP 3: Now click on "Use the computer without a display".

regsvr32 vbscript.dll
STEP 4: You will get a message prompt “DLLRegisterServer in vbscript.dll succeeded”. Then press “OK”.
That’s all you need to do in order to fix the error in installing iTunes in Windows Vista Operating System. After following all the above directions, try to install the iTunes again.




How to fix “Application not found” error when opening a hyperlink in Windows Mail?

Rundll.exe is a crucial file of the system. So, any error in this file implies problems for the operating system. This file ensures that all the dll files are work properly and then their repositories are stored into the memory of the system.

If you find trouble in opening hyperlink in Windows Live Mail, it might be due to “application not found” error. The error “application not found” predominantly occurs, when the http protocol association is incorrect or it is not arranged in the browser, which is considered as default on the operating system. The similar error may also appear when one clicks twice on Internet Shortcut file (.URL) in his/her computer.

Following are some steps used to rearrange default browser:

STEP 1: First of all, go to “Start” menu and click on “Default Programs”
STEP 2:Now, click on “Set your default programs” option
STEP 3:You have to choose Internet Explorer from the Program list and click on  “Set this program as default”.

STEP 4: press “OK”.

The “application not found” problem has been resolved by using the Default application attribute in Vista. It will automatically rearrange the default browser choices. Hopefully you will be able to fix your problem after following the above steps.



How to fix Error message "IE has encountered a problem and needs to close”, when upgrading the Vista Premium?

Whenever any user faces errors like “IE has encountered a problem and needs to close” error, it implies that Internet Explorer is having some version issues with the add-ons which are a part of Windows Vista OS. So, all the damaged IE files on the system can be detected through a system file checker and then deleted.

Here are some help full steps that will help you repair the Error “Windows has encountered a problem and needs to close”:

STEP 1: First of all click on “Start” and write “cmd.exe” in the emerged “Search” dialog box.
STEP 2: Now, you have to strike the “CMD” option from right part of your mouse and under the CMD programs choose “Run as administrator”
STEP 3:In the command prompt, you have to write the code as: sfc /scannow

STEP 4: Push “Enter” key. It will start system file checker.

Once the setup process gets completed, you need to reboot IE that will resolve the "Microsoft encountered a problem and needs to close” issue and will help you check whether it’s corrected.

Alternate Method:

Alternate Method:

Sometimes, missing or corrupted IE files occur due to which the error "IE Has Encountered a Problem and Needs to close" happens. If you are using IE version 7 or 8, you can easily restore and fix these files. However, if you are not sure of the IE version used by you, start with a new window of browser to determine which version is being used.

STEP 1: Now, first of all, strike the “Help” option present in toolbar and then select “About Internet Explorer”. Window will represent the Windows version being used.

STEP 2: You can continue with the procedure to fix the error, as soon as you determine the IE version.

STEP 3: Now, in the Internet Explorer, click on Tools option and then choose Internet Options.
STEP 4: In the “Internet Options” dialog box, open advanced menu and strike Reset button.
STEP 5: Beneath the “Reset Internet Explorer Settings” title you will get an instruction as “Are you sure you want to reset all Internet Explorer settings”. Strike the Reset option. ”
STEP 6: You will now find that all your IE settings have been reset. So, hit on Close button.
STEP 7: Click “OK” on the “Internet Explorer” dialog box that depicts “For changes to take effect, you will need to restart Internet Explorer”.
Checking for IE Updates can also be a method to remove the internet explorer error.

To fix the error message, you have to download and install the updates of Internet Explorer. However, these updates are automatically available on the PC when the operating system is Vista. They only have to be installed by the user through these steps:

Now, to install all Windows updates in vista, in the Internet Explorer window, click on “Tools” and then choose Windows Update Option.
So, now, new Updates appear on your desktop screen and you need to strike Install Now option for using them.
Once you install the updates successfully, reboot IE to verify all changes and to check whether the issue has been fixed or not. That’s all you need to do in order to fix error message “Internet Explorer has encountered a problem and needs to close”.


ow to fix the error message “Windows Host Process Rundll32 has stopped working” which occurs while user tries to open Windows Security Center?

If you are getting error message “windows host process rundll32 has stopped working” you need to fix rundll32 problem.  Host Process Rundll32 has stopped working error message can be resolved by following some simple instructions. Rundll32 file is responsible to run many applications properly in Windows Vista. Users must need to repair Rundll32 file to troubleshoot the error “Windows Host Process Rundll32 has stopped working” by making some changes in Windows registry.

Please follow the steps provided below to fix rundll32 error.

STEP 1: Click on Computer from start menu.
STEP 2: Double click on your system drive. (The Drive in which your window is installed)
STEP 3: Double click on “Windows” folder.

STEP 4: And then locate the folder “System32” and double click on that.

STEP 5: Find the file “lmpgspl.ax” in “System32” folder.

STEP 6: Right click on the file and select “Rename” from the shortcut menu.

STEP 7: Give a new name to the file as: 1_lmpgspl.ax
STEP 8: Close all folders and windows, and restart your computer.

STEP 9: Now try to run Windows Security Setup.

Your rundll32 stopped working problem is fixed.

If you are still experiencing the same problem, please try to fix rundll32 problem by this alternative method.

STEP 1: Click on “Start” menu and type “cmd” in the search box.
STEP 2: As soon as cmd.exe comes on the screen, right click on it and choose the option “run as administrator”.
STEP 3: Type the following commands one by one in Run dialog box and press enter key.
STEP 4: Now restart your computer again to make the changes effective.

That’s all you need to do in order to fix rundll32 file in your Windows Vista based computer system.



How to fix "Windows Resource Protection could not start the repair service" when running SFC in Window Vista.

When the user tries to use the system file checker utility through the command prompt box with the command ( sfc/Scannow ), then the error “windows resource protection could not start the repair service” occurs. Due to this error “windows resource protection could not perform the requested operation”, you might also face trouble with installation of Windows updates and Installer Setup files. This problem appears when the Windows Modules Installer service (TrustedInstaller) is deactivated. So, the user has to change the start up type of this service to get rid of this error.

You can use the below mentioned steps to rearrange the service:

STEP 1: Go to “Start” menu, then in the search box, type “Services.msc” and press enter key to execute it.
You will see a “User Account Control” window, click on “Continue”.

STEP 2: Services dialog box will be opened. Locate”Windows Modules Installer“ and right click on that.

STEP 3: Select properties from the shortcut menu.

STEP 4: Now, set its “Startup type” to Manual.

STEP 5: Click Apply & “OK”.

That’s all you need to do in order to fix “Windows Resource Protection could not start the repair service” error message. Consequently, the Window Module Installer has complete reach to Windows Resource Protection along with registry keys.



How to set Windows Media Player and remove QuickTime player, as the default player of Internet Explorer?

Many times when you try to play .mp3 files, they automatically start in any other application instead of default Windows Media Player. This may occur, when the user downloads the mp3 files in his computer and they have any other extension instead of .wmp. Users need to make Windows Media Player, the default media player, so that they can run every mp3 file in it. So, any file except with these extensions (.mp4, .ra, .mov , .qt, .rm, .ram) will be played by Windows Media player after it’s established as the default media player.

If you don’t know how to play .mp3 files with Windows Media Player, please follow the steps provided below:

STEP 1: Click on “Control Panel” from “Start” menu.
STEP 2: Make sure that “Control Panel home” is selected. Now click on “programs”

STEP 3: Now click on “Default programs”.

STEP 4: Click on “Set your default Programs”.

STEP 5: From the programs list, click on “Windows Media Player” to select it.

STEP 6: Now, from the right side; click on “Set this program as default”.

STEP 7: Now click on “Ok” button.

That’s all you need to do in order to make the Windows Media Player your default mp3 player.


How to fix error message “Could not find or load ActiveX control” which occurs when any one tries to open the latest QuickTime player in Windows Vista?

Quick time is a framework which reads many types of Picture, Video and Audio files. If you get the error “quick time player not working”, you need to follow some simple steps to set the permission to run ActiveX which is needed to fix the quick time player. A Microsoft file called SubInAcl.exe can be employed to get these permissions and use Quick time player.

Please follow the steps provided below to fix the issue “quicktime player not working”:

STEP 1: Visit the link provided below:

http://www.microsoft.com/downloads/en/details.aspx?FamilyID=e8ba3e56-d8fe-4a91-93cf-ed6985e3927b & displaylang=en

STEP 2: Once you will visit the above link, following window will be opened. Click on Download button. The file is downloaded at the location: C:\Program Files\Windows Resource Kits\Tools
STEP 3: Double click on downloaded file from your computer to install it.

STEP 4: Now click on Computer from start menu. 

STEP 5: Double click on your window drive to open it. 
STEP 6: Double click on folder “Program Files”.

STEP 7: Locate the folder “Window Resource Kit” and double click on that to open.

STEP 8: Now locate the folder “Tools” and double click on it to open.

STEP 9: In the above location, select the subinacl.exe and press enter key from your keyboard.

STEP 10: Command Line Tool will run for some time. It’s shown because all the instructions given are processed by it.

That’s all you need to do in order to reset your quick time player. Now try to open Quick Time Player.


How to add shortcut of Quick Launch Toolbar in Windows Vista?

Windows quick launch icons are the shortcut icons which can be frequently accessed. Vista quick launch is a great feature to access shortcuts. Some users don’t know the way to show quick launch bar on the desktop. You just need to follow some simple steps to restore quick launch toolbar. On the desktop

Please follow the steps provided below to show the quick launch toolbar on desktop.

%systemdrive%\Users\Default\AppData\Roaming\Microsoft\Internet Explorer\Quick Launch

STEP 1: Click on start and type the following command in start search box and hit enter key.
STEP 2: Now go ahead and make a right click on “Switch between windows” and select Copy.
STEP 3: Now type the following command in start search box.

%userprofile%\AppData\Roaming\Microsoft\Internet Explorer\Quick Launch and hit Enter.
STEP 4: Paste the copied program “Switch between Windows” by pressing CTRL + V.

STEP 5: Quick Launch Toolbar will show shortcuts of added programs immediately.

STEP 2: Then choose “Set your default programs” option.

All the above steps will enable a user to add a program in Quick Launch Toolbar.


How to apply Default User Settings of Start menu in Windows Vista?

Customizing the Start menu will help you to access the programs easily. Programs in start menu are frequently accessible to user. You can easily customize Start menu items in Vista Windows. Please follow the steps provided below to customize the Start menu Vista.

STEP 1: Click on Start button.

STEP 2: Now click on “Control Panel
STEP 3: Go ahead and hit “Appearance and Personalization”.

STEP 4: After that please click on “Taskbar and Start Menu”.

STEP 5: In the opened dialog box Click on Start Menu tab and then hit Customize.

STEP 6: Now click on “Use Default Settings” and click on “Ok”.


STEP 7: Now click on “Apply” and “Ok” to apply the changes

These are the steps needed to restore default settings for start menu.


How to modify Autorun utilities in Windows Vista?

Autorun feature in Windows Vista start the programs or applications when user inserts CD/DVD in CD ROM. It plays autorun script which is already set in Windows. Users can easily change settings of autorun for Windows, in order to stop programs from running automatically upon the insertion of CD. Please follow the steps provided below to customize autorun program in Vista for various programs.

STEP 1: Click on Start and hit Control Panel
STEP 2: Make sure “Control Panel Home” is selected. Click on “Hardware and Sound”.
STEP 3: Now you need to click on “AutoPlay”.
STEP 4: From the media list, select the options from the drop down list for each media. If you don’t want to run autorun, select “Take No Action”. Once you have done, click on Save and close all the windows.
That’s all users need to do in order to customize autorun settings. After selecting the option “Take no action”, users need to manually open and play all the applications which were selected under this option. Its because when the CD containing such content is inserted, it wont be played under autorun settings.
For creating autorun for certain content, the user can further select the apt option in the drop-down menu. This is how you can enable autorun Windows.

How to check and repair corrupt system files in Windows Vista Home?

If you have Windows Vista and system file checker shows that some files have been corrupted, you need to restore the original copy of these system files to repair them. Repairing Windows Vista will restore the corrupted system files so that system file checker Vista can recognize them.

Please follow the steps provided below to repair Windows Vista system files.

STEP 1:Type CMD in Start search box from Start menu.

STEP 2: Right click on “cmd” which appears in the program list and select “Run as Administrator”.
You will see “User Account Control” window, click on “Continue”.

STEP 3: Type the following command in command prompt and press enter key to execute. cd c:\

STEP 4: You will be directed to your root directory. Now type the following command and press enter key. sfc /scannow

STEP 5: This command will scan all system files and replace the corrupted files with correct files.

STEP 6: Wait for some time while system scans and repairs the system files. You will see the completion message. After than, type “exit” and press “Enter” to close the command prompt and restart your computer.

That’s all you need to do in order to restore corrupted files in Windows Vista.


How to check weather Hibernation feature is supported in Windows Vista or not?

Hibernation is an excellent feature in Windows Vista. By putting the computer system on hibernation, Windows creates a copy of the data on RAM to the hard disk and switches off the power supply and whenever the user switches to general mode, all the data from the hard disk gets reloaded on RAM. It’s done to save the electricity which is spent by computer peripherals even though the machine is not in use. This computer Hibernation feature doesn’t exist in every computer. The reason for the non existence of this feature is that the computer just does not support this feature or it has been disabled or deleted somehow. Alternative reason for absence of Windows hibernation feature could be if Hybrid sleep has been enabled.

To check whether your computer supports the hibernation Vista feature or not, you can try the below steps:-

STEP 1: Click on the start button on your computer screen. .
STEP 2: Type “command prompt” in the search box
STEP 3: On the Command Prompt make a right click and select Run as Administrator.

STEP 4: Type “powercfg /a” and hit enter in the Command Prompt window. Windows will display all the available power features in your Windows Vista.
If hibernation is listed as a feature, then its supported by your operating system.
That’s all you need to do in order to check whether your Windows supports Hibernation feature
 
 

How to Connect Windows Vista based computer system to Home Network?

Windows Vista home networking environment enables you to connect all the computers and peripheral devices to share information frequently. Some home workers find the process of how to set up a Vista home network quite tough. Setting up a home network in Windows Vista is easy. Users just need to follow some simple steps in order to setting up a home network in Vista home edition.

To arrange a Windows home network setup, please follow the steps provided below.

STEP 1: Get and install all required hardware peripherals you need to connect to internet.

STEP 2: Make sure that you are connected to internet.

STEP 3: Click on Start menu and then click on Control Panel.

STEP 4: Click on “Network and Internet” under Control Panel.
STEP 5: Click on “Network and Sharing Center”.
STEP 6: Now go ahead and make a single click on “Set up a connection or network”.
STEP 7: Select “Set up a wireless router or access point” and click on Next Button. 
STEP 8: From the resulting window, click on Connect to a Network and click Next button.
STEP 9: Now in the next window, you need to select the network to which you want to be connected from the list and click on “Connect” button.
STEP 10: If it prompts you to enter security key or passphrase, please enter your network security key and click on “Connect”.
These steps are sufficient for one to create a Window Vista home based network. After following the above step you will be able to share the information with the other connected systems. 


How to Delete Temp Files in Windows Vista?

Deleting temporary files will free up the disk space in Windows Vista and improve the systems performance. Windows creates temporary files automatically, when user performs any action in this operating system. Users feel confused about how to delete temporary files in Vista. It is mandatory and easy to delete temporary files in Windows. We are providing you some simple steps to delete temp files in Vista.

Please follow the steps provided below to delete all temp files.

STEP 1:Click on Start and type the following command in start search box.

%temp%

STEP 2: Press enter key. Temp folder will be opened.

STEP 3: Now click on Edit Menu and select “Select All”.

STEP 4: All temp files will be selected. Now go ahead and select “Delete” form “file” menu.
STEP 5: That will delete all the temp files from your computer. The deleted files will be sent to the recycle bin. You can delete those files from recycle bin permanently.

That’s all you need to do in order to remove temp files from your computer system.


 

How to Empty D Drive on Windows Vista?

Formatting any drive in Windows will delete all data stored in that drive. The data can not be recovered once deleted from the drive. However, the user can delete all the data stored in any non-Windows Vista disk. Such disk cleaning is quite essential under solutions for how to repair Windows.

Please follow the steps provided below to Empty D drive on your Windows Vista and clean up Windows.

NOTE : This drive should not be the drive in which your Windows is installed.

STEP 1: Click on Start menu and then click on Computer.

STEP 2: Locate the “Local Disk(D:)” and right click on it, and then select Format.
STEP 3: User Account Control message will appear. Click on Continue button to start formatting.

STEP 4: Check the box which appears for “Quick Format” and then click on “Start” to start format.
STEP 5: Please wait for some moments so that Windows can format your D drive.

That’s all you need to do in order to format or empty your Drive.


How to change icon spacing on a Windows Vista desktop?

Desktop Icons Spacing is the feature in Windows Vista which lets the user to vary the space between icons on the desktop. Some users don’t like the default desktop Icon Spacing. If you don’t know how to change space between icons according to your comfort, you need to follow some simple steps to do so.

Here we have the solution for you to fix Windows icon spacing problem. Please follow the steps provided below:-

STEP 1: Right-click on a blank area of your desktop and then click on “personalize” from the shortcut menu.

STEP 2: Click on “Window Color and Appearance”.
STEP 3: Select 'Open classic appearance properties for more color options'
STEP 4: Now click on “advanced” button.
STEP 5: In the “Item” drop down box select 'Icon Spacing (Horizontal) 'or “Icon Spacing (Vertical)” according to your convenience.
STEP 6:Now Choose the Size value for Icon spacing (for both horizontal and vertical options) from the Size tab according to your convenience and click on “Ok” button.
That’s all you need to do in order to change the space between Vista icons on desktop.



How to Open BIOS in Windows Vista?

BIOS((Basic Input/Output System) in Windows is a hardware device which loads the Operating System. Windows BIOS identifies and loads all the system software and software of peripheral devices when the user starts the system. User can also modify Windows BIOS according to his/her needs. If a user wants to do some modifications on BIOS, he/she needs to access it. Here are the steps to open BIOS for Windows Vista. Users can change the various options through the BIOS which include, boot order, testing and power options.

STEP 1: Restart your computer.

STEP 2:Now you need to Press “Del” or “F2” key from your computer’s keyboard when windows stars booting up.
STEP 3: A message will be displayed “Entering setup”.

STEP 4: After that please use the arrow keys on your keyboard to select options.
STEP 5: Use the tab key to switch the option “permission settings”.
STEP 6: With the help of the enter key, finalize the individual changes.

STEP 7: When you finish with all modification, press F10 key to save the settings and exit from the BIOS.

STEP 8: You can shut down the computer, and start it, so that all the above changes are made.

The above steps are enough when you want to open and make changes in BIOS in your Windows Vista.



How to restore the video card drivers to previous versions in Windows Vista?

Many time users update the drivers to get a new version, but for some reason; latest version does not work properly. In that case, users need to restore previous version of that driver. But user can easily get the previous version of the drivers with the help of Windows system restore feature. This feature creates a restore point which can be used to restore the last version which had the older versions of drivers. For example, if you have installed a video card driver with latest updates and it’s not working aptly, with the computer system restore, you can restore your old driver for video card and updated driver for your video card will be removed.

Here are the steps to delete the recent restore point from your hard disk.

STEP 1: Type “Device Manager” in start search box and press enter key.

You will see “User Account Control” window, click on “Continue”.

STEP 2: Now double click on “Display Adapters”.

STEP 3: Video card will be displayed. Right click on your Video card and select properties.
STEP 4: Select the driver tab and click on “Roll Back Driver”.
STEP 5: Click on Yes when warning message appears. Windows will restore your previous version of video card.

STEP 6: Restart your computer to make the changes effective.

That’s all you need to do in order to restore previous version of video card in your Windows Vista based operating system.




How to access safe mode in Windows Vista?

Safe mode is a problem-solving mode in all Windows operating systems. Only essential system software gets executed in safe mode of Windows. Safe mode in Windows lets the user to resolve most of the problems easily as much software do not execute in safe mode. User can easily access the safe mode in Windows.

Here are the steps to access the safe mode in Windows Vista based computer system.

STEP 1:Restart your computer.

STEP 2: At the time of booting, Windows logo appears. User needs to be quick and press the F8 key from the keyboard before Windows Logo Appears on the screen.

STEP 3:If you somehow miss to press the F8 key and boot Windows in safe mode, let your system bootup completely and then again restart your computer.

STEP 4: Now keep on pressing F8 key from your keyboard.

STEP 5: Windows will show multiple booting options. Move your selection to safe mode by arrow keys and press enter key.

STEP 6: Submit your username and password if password protection is set to safe mode.

STEP 7: When your PC enters in safe mode,you can see the words "Safe Mode" in upper left corner of the Windows screen.

These are the steps required to enter the Safe mode of Windows Vista.


How to delete auto run viruses manually from Windows Vista?

Some times, viruses get downloaded, when you visit any website or get copied data from CD or Floppy disk when using pirated disks. There are too many types of viruses and their behavior is also different. Some viruses get executed when you restart your Windows and harm the files or may hack your system. These types of viruses are known as auto run viruses. Such viruses can be removed by following some simple steps. We are providing you steps to remove the auto run virus in a Windows Vista based computer system.

Here are the steps to remove the auto run virus from Windows Vista:

STEP 1: Logon as an administrator in Windows Vista.

STEP 2: Type "CMD" in start search box from the start menu.
STEP 3: Right click on CMD from the program list and select "Run as Administrator".
STEP 4: Click on "Continue" button when User Account Control message box appears.  


Step 5: Command prompt will appear. Type the following commands one by one and press enter key after submitting each command.

cd\
cls
attrib -s -h -r c:\autorun.inf

attrib -s -h -r c:\ntdelect.com
del c:\autorun.inf

del c:\ntdelect.com

attrib -s -h -r c:\windows\system32\kavo.exe
del c:\windows\system32\kavo.exe
Exit
Now you need to perform all the above commands for each drive in your Windows. To switch the drive name in these commands, just type the respective drive name followed by semi colon (: ) and then pressing the enter key.

For example, to switch from Drive C: to Drive D, you need to enter this command:

D:



After that, follow the step 6.
STEP 6: Now type "regedit" in start search box and right click it from the programs list.
STEP 7:Select "Run as Administrator" from the shortcut menu.

Step 8: Click on "Continue" button when User Account Control message box appear.    

Step 9: Registry Editor Window will be opened. Navigate the following branch.

HKEY_LOCAL_MACHINE \ SOFTWARE \ Microsoft \ Windows \ Current Version

STEP 10: Now locate "Run" under "CurrentVersion".

STEP 11: Look for the file name "kevo.exe" in right panel.

STEP 12: Right click on that file and select "Delete" from the shortcut menu.

Step 13: Click on Yes when Confirm value Delete box appears.

Step 14:Now turn off the registry Editor.

Step 15:Start your system again so that above changes can take place easily.

That’s all you need to do in order to remove the auto run virus from your Windows Vista.

 

How to disable the security feature windows firewall in Windows Vista?

Windows firewall is the security feature offered by the manufacturer of this operating system in all versions of Windows. Windows firewall keeps your data and software safe from viruses, spyware, adware and malware. By default, firewall is enabled in Windows; but users can enable or disable this firewall feature any time. If you have installed another firewall to keep your computer system safe, you can disable the default windows firewall by following the steps provided below:
Step 1: Click on "Control Panel" from start menu.

Step 2: Select the "Classic View" and then double click on "Windows Firewall"
Step 3: Click on “Change Settings” button.
Step 4: Click on "Continue" button when User Account Control message box bounces up on screen.  
Step 5: Windows Firewall Settings dialog box will appear. Make sure that "General" tab is selected.
Step 6: Now select the radio button for "Off(not recommended)".

Step 7: Click on Apply and then Ok button.

That’s all you need to do in order to turn off Windows Firewall in Windows Vista.